MC74VHC574DTR2G
| Parameters | |
|---|---|
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 10.6 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.6 ns |
MC74VHC574DTR2G Overview
It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. T flip flop uses Tri-State, Non-Invertedas the output. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 74VHC series. A frequency of 115MHzshould not be exceeded by its output. D latch consists of 1 elements. A total of 20 terminations have been made. If you search by 74VHC574, you will find similar parts. An input voltage of 3.3Vpowers the D latch. A 4pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the AHC/VHCfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. This board has 20 pins. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. An electronic part with 8bits has been designed. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be above 2V. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D latch operates on 2/5.5V volts. A total of 2ports are embedded in the D flip flop. There are 3 output lines on it. This D latch consumes 4μA quiescent current at all. A total of 8 channels are available.
MC74VHC574DTR2G Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
MC74VHC574DTR2G Applications
There are a lot of ON Semiconductor MC74VHC574DTR2G Flip Flops applications.
- Asynchronous counter
- Count Modes
- Computers
- Common Clocks
- Memory
- Set-reset capability
- Latch
- Load Control
- Memory
- Storage Registers
