MC74VHC574DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74VHC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 16.7 ns |
| Turn On Delay Time | 5.6 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHC574DWR2G Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. The Tape & Reel (TR)package contains it. There is a Tri-State, Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. Currently, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74VHCseries of FPGAs. It should not exceed 115MHzin its output frequency. A total of 1elements are contained within it. There is 4μA quiescent consumption. A total of 20 terminations have been made. It is a member of the 74VHC574 family. It is powered from a supply voltage of 3.3V. The input capacitance of this JK flip flopis 4pF farads. It is a member of the AHC/VHCfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. This board has 20 pins. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 8bits in this flip flop. As soon as 5.5Vis reached, Vsup reaches its maximum value. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. In order to achieve its superior flexibility, 8 circuits are used. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The power supply is 2/5.5V. The flip flop contains 2ports. There are 3 output lines in this JK flip flop.
MC74VHC574DWR2G Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
MC74VHC574DWR2G Applications
There are a lot of ON Semiconductor MC74VHC574DWR2G Flip Flops applications.
- Load Control
- Asynchronous counter
- Circuit Design
- Computers
- Buffered Clock
- High Performance Logic for test systems
- Modulo – n – counter
- EMI reduction circuitry
- Divide a clock signal by 2 or 4
- Synchronous counter
