MC74VHC74DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 115MHz |
| Propagation Delay | 18 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 7.3 ns |
| Family | AHC/VHC |
| Logic Function | AND, D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHC74DTR2G Overview
It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width). Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Differential. This trigger is configured to use Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of 2V~5.5V volts, it operates. It is operating at a temperature of -55°C~125°C TA. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74VHCseries FPGA. In order for it to function properly, its output frequency should not exceed 115MHz. A total of 14terminations have been recorded. You can search similar parts based on 74VHC74. An input voltage of 3.3Vpowers the D latch. Its input capacitance is 4pFfarads. It belongs to the family of electronic devices known as AHC/VHC. There is an electronic part mounted in the way of Surface Mount. This board has 14 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V. Due to its reliability, this T flip flop is well suited for TR. It operates with 1 output lines. 2μAquiescent current consumed. A total of 2 channels are available.
MC74VHC74DTR2G Features
Tape & Reel (TR) package
74VHC series
14 pins
MC74VHC74DTR2G Applications
There are a lot of ON Semiconductor MC74VHC74DTR2G Flip Flops applications.
- Matched Rise and Fall
- Buffered Clock
- Memory
- Data Synchronizers
- Synchronous counter
- Event Detectors
- Frequency division
- Safety Clamp
- Common Clocks
- QML qualified product
