MC74VHCT574ADTR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 130MHz |
| Family | AHCT/VHCT |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MC74VHCT574ADTR2 Overview
It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. It is a type of FPGA belonging to the 74VHCT series. This D flip flop should not have a frequency greater than 130MHz. In total, it contains 1 elements. During its operation, it consumes 4μA quiescent energy. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is powered by a voltage of 5V . Its input capacitance is 4pF farads. In terms of electronic devices, this device belongs to the AHCT/VHCTfamily of devices. Vsup reaches its maximum value at 5.5V. Normally, the supply voltage (Vsup) should be above 4.5V. This D flip flop is equipped with 0 ports.
MC74VHCT574ADTR2 Features
Tape & Reel (TR) package
74VHCT series
MC74VHCT574ADTR2 Applications
There are a lot of Rochester Electronics, LLC MC74VHCT574ADTR2 Flip Flops applications.
- Control circuits
- Data storage
- Data Synchronizers
- ESD performance
- Pattern generators
- Common Clocks
- CMOS Process
- Latch
- Frequency Divider circuits
- Event Detectors
