MC74VHCT574ADTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHCT574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Turn On Delay Time | 4.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 95000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHCT574ADTR2 Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. It operates with a supply voltage of 4.5V~5.5V. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74VHCTseries of FPGAs. There should be no greater frequency than 130MHzon its output. A total of 1elements are contained within it. As a result, it consumes 4μA quiescent current and is not affected by external forces. The number of terminations is 20. This D latch belongs to the family of 74VHCT574. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 4pFfarads. This D flip flop belongs to the family of AHCT/VHCT. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Flip flops designed with 8bits are used in this part. Its superior flexibility is attributed to its use of 8 circuits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. It runs on 5Vvolts of power. The D flip flop has no ports embedded. The supply voltage should be maintained at 5V for high efficiency. To operate, the chip has a total of 3 output lines.
MC74VHCT574ADTR2 Features
Tape & Reel (TR) package
74VHCT series
20 pins
8 Bits
5V power supplies
MC74VHCT574ADTR2 Applications
There are a lot of ON Semiconductor MC74VHCT574ADTR2 Flip Flops applications.
- Frequency Divider circuits
- Load Control
- Automotive
- Control circuits
- Differential Individual
- ESD performance
- QML qualified product
- Event Detectors
- Storage Registers
- Single Up Count-Control Line
