MC74VHCT74ADR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74VHCT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74VHCT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 6.3 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHCT74ADR2 Overview
14-SOIC (0.154, 3.90mm Width)is the way it is packaged. You can find it in the Tape & Reel (TR)package. The output it is configured with uses Differential. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. In the operating environment, the temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74VHCT series. A frequency of 140MHzshould not be exceeded by its output. It consumes 2μA of quiescent current without being affected by external factors. The number of terminations is 14. If you search by 74VHCT74, you will find similar parts. The power supply voltage is 5V. The input capacitance of this JK flip flopis 4pF farads. This D flip flop belongs to the family of AHCT/VHCT/VT. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 14 pins. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. The superior flexibility of this product is achieved by using 2 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D latch runs on a voltage of 5V volts. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It is designed with 1 output lines.
MC74VHCT74ADR2 Features
Tape & Reel (TR) package
74VHCT series
14 pins
5V power supplies
MC74VHCT74ADR2 Applications
There are a lot of ON Semiconductor MC74VHCT74ADR2 Flip Flops applications.
- Load Control
- Pattern generators
- Instrumentation
- ESCC
- Storage Registers
- Supports Live Insertion
- Storage registers
- Reduced system switching noise
- Set-reset capability
- Patented noise
