MCP1631VT-E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1631 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Enable, Frequency Control, Ramp |
| Input Voltage (Min) | 3V |
| Topology | Sepic |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 2.5ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 2.7 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 2MHz |
| Switching Frequency | 2MHz |
| Duty Cycle | 10 % |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MCP1631VT-E/ST Overview
Capsuled in the 20-TSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. For outputs of 1, this dc motor controller is suitable. A solid enclosure of Tape & Reel (TR) surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). DC control operates at 3V~5.5V volts and has 3V~5.5V supply voltage. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Enable, Frequency Control, Ramp which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 20 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. Search for "MCP1631" to find other relevant dc to dc converter ics. The switching converter has a total of 20 pins. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 3V. Voltages 5.5V are the maximum that the dc to dc regulator will accept. It's important to remember that the dc dc regulator's normaloutput current is 250mA, so you should note it down when starting a new project. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is a maximum frequency of 2MHz on this dc regulators. 2MHz is the frequency at which this controller performs well most of the time.
MCP1631VT-E/ST Features
Transistor Driver Outputs
Enable, Frequency Control, Ramp
PULSE WIDTH MODULATION
Switching Frequency: 2MHz
MCP1631VT-E/ST Applications
There are a lot of Microchip Technology MCP1631VT-E/ST DC to DC converter applications.
- Smart grid
- Alternators
- Planers
- Gear/thread machining machines
- Network technology
- Domestic water pumps
- Solar power plants
- Textile machinery
- Window air conditioners
- Precision electronic equipment
