MCP1632-AAE/MC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ADJUSTABLE SOFT START |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1632 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Enable |
| Input Voltage (Min) | 3V |
| Topology | Boost, Cuk, Flyback, SEPIC |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 7.5mA |
| Synchronous Rectifier | Yes |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 85 % |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Length | 3mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
MCP1632-AAE/MC Overview
As a result of 8-VFDFN Exposed Pad compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 1 output generation. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. A 3V~5.5V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~125°C TJ dc switcher before. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Enable. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the DUAL position. The 8 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. Searching "MCP1632" will return other relevant dc to dc converter ics. 8 pins are on switching converter. dc dc voltage regulators should have a minimum input voltage of 3V. At most, the dc to dc regulator accepts 5.5V input voltage. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 85 %. 300kHz is the frequency of the switching controller. The value of DC to DC voltage regulator is set at ADJUSTABLE SOFT START in order to fulfill the requirements more effectively. 7.5mA more than 7.5mA current should be supplied to the controller.
MCP1632-AAE/MC Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 300kHz
ADJUSTABLE SOFT START
MCP1632-AAE/MC Applications
There are a lot of Microchip Technology MCP1632-AAE/MC DC to DC converter applications.
- Magnetohydrodynamic power
- Digital display device
- Large fire protection systems
- ATMs
- Direct power supply system
- Machining centers
- Medical equipment
- Injection molding machinery
- Driver circuits
- Production lines
