MCP1651ST-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1651 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| Control Features | Current Limit, Enable, Low Battery, Power Good |
| Input Voltage (Min) | 2.7V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 750kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 80% |
| Height | 850μm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1651ST-E/MS Overview
Capsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) are supported. 2.7V~5.5V is the operating voltage and supply voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~125°C TJ. With this switching controller, you can switch at 750kHz. Surface Mount makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Low Battery, Power Good. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 8 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 3.3V. Other relevant dc to dc converter ics will be returned if you search "MCP1651". In total, switching converter has 8 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the input voltage of the dc dc voltage regulator be 2.7V. DC switcher's Surface Mount qualifies it for most applications and prototypes. The max frequency of the pmic can reach 850kHz. To run the voltage regulator dc to dc safely and reliably, users should apply 5.5V to the voltage regulator dc to dc. 1A is the largest value switching converter outputs.
MCP1651ST-E/MS Features
Transistor Driver Outputs
Switching Frequency: 750kHz
Current Limit, Enable, Low Battery, Power Good
PULSE WIDTH MODULATION
MCP1651ST-E/MS Applications
There are a lot of Microchip Technology MCP1651ST-E/MS DC to DC converter applications.
- Drilling machines
- Low output voltage switching power supply circuits
- Analog precision reference circuits
- Geothermal power
- Overvoltage protection circuits in TV sets
- Industrial robots
- Wide-range voltage regulation circuits
- Automatic plug-in machines
- Product burn-in
- Adjustable voltage or current linear circuits
