MCP1653RT-E/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1653 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| Control Features | Current Limit, Enable, Low Battery, Power Good |
| Input Voltage (Min) | 2.7V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 750kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 80% |
| Height | 850μm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1653RT-E/UN Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). 2.7V~5.5V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~125°C TJ dc switcher. The switching controller can be switched at 750kHz. A generalization of dc dc regulator can be made using Surface Mount. The dcdc regulator features Current Limit, Enable, Low Battery, Power Good for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. An array of 10 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 3.3V. MCP1653 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 10 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. The minimum input voltage of the dc dc voltage regulator should be 2.7V. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator has a maximum frequency of 850kHz. Users should apply 5.5V to operate the voltage regulator dc to dc safely and reliably. A value of 1A is output as the maximum value of current.
MCP1653RT-E/UN Features
Transistor Driver Outputs
Switching Frequency: 750kHz
Current Limit, Enable, Low Battery, Power Good
PULSE WIDTH MODULATION
MCP1653RT-E/UN Applications
There are a lot of Microchip Technology MCP1653RT-E/UN DC to DC converter applications.
- Communication system
- Automation technology
- Flexible manufacturing cells
- Wind power
- USB circuits
- Printing
- Lathes
- Smoke prevention equipment
- Pipe bending machines
- Adjustable voltage or current linear circuits
