MCP19035-BAAAE/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP19035 |
| Function | Step-Down |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~30V |
| Control Features | Enable, Phase Control, Power Good |
| Topology | Buck |
| Min Input Voltage | 8V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 14V |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 15 ns |
| Max Duty Cycle | 85 % |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP19035-BAAAE/MF Overview
Capsuled in the 10-VFDFN Exposed Pad package, the switching controller suits most application needs. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 4.5V~30V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Phase Control, Power Good. A SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 10 terminations. Other relevant dc to dc converter ics can be found by searching "MCP19035". Total pins of switching converter are 10. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, DC regulator outputs 5V volts. You should note that the dc dc regulator's usual output current is 20A. It is set to 85 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sA frequency of 600kHz is used by the switching controller. The maximum input voltage of the dc switcher is 14V, so users need to limit the voltage accordingly. There must be a 8V supply voltage. Switching with 1 phases is the property of this controller.
MCP19035-BAAAE/MF Features
Transistor Driver Outputs
Enable, Phase Control, Power Good
Max Duty Cycle: 85 %
Frequency: 600kHz
MCP19035-BAAAE/MF Applications
There are a lot of Microchip Technology MCP19035-BAAAE/MF DC to DC converter applications.
- Smoke exhaust equipment
- Power supplies of electronic gadgets
- Refrigerators of central air conditioners
- Various CNC machine tools
- PSRR circuits
- Surge protection circuits
- Fire elevators
- seismic instrument power circuits
- Experimental setup
- Handheld GPS
