MCP19118-E/MJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP19118 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.6V |
| Output Type | Transistor Driver |
| Supply Voltage-Max (Vsup) | 40V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SMBus |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~40V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Control Features | Phase Control |
| Topology | Buck |
| Frequency - Switching | 100kHz~1.6MHz |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Max Duty Cycle | 98.75 % |
| Serial Interfaces | I2C, PMBus, SMBus |
| Clock Sync | No |
| Height | 850μm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP19118-E/MJ Overview
Capsuled in the 24-VFQFN Exposed Pad package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 4.5V~40V. Suitable for a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 100kHz~1.6MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Featured in the dcdc regulator is Phase Control which allows efficient switching control. There are a QUAD terminal on the switching converters. The 24 terminations can be used for a wide range of dc switching. MCP19118 can be used to locate other relevant dc to dc converter ics. 24 pins are present on switching converter. Statistically, DC regulator outputs 3.6V volts. You should note that the dc dc regulator's usual output current is 2A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 98.75 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controllers work at 1.6MHz Hz. Automotive, AEC-Q100 is a series of dc to dc voltage regulator. The supply voltage must be 12V.
MCP19118-E/MJ Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1.6MHz
Phase Control
Max Duty Cycle: 98.75 %
Frequency: 1.6MHz
MCP19118-E/MJ Applications
There are a lot of Microchip Technology MCP19118-E/MJ DC to DC converter applications.
- Energy management systems
- Hydraulic presses
- Shearing machines
- Various precision measuring detectors
- Terrestrial set-top boxes
- Computer-related products
- Injection molding machinery
- Product burn-in
- ATMs
- Drilling machines
