MCP73833T-CNI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73833 |
| Pin Count | 10 |
| Output Voltage | 4.5V |
| Power Supplies | 3.8/5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 3mA |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73833T-CNI/MF Overview
You can find it in the Tape & Reel (TR) package.For convenience, it is included in the 10-VFDFN Exposed Pad package.In this case, the device is mounted in the way of Surface Mount.Setting the temperature to -40°C~85°C TA is the right thing to do.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.For the device to be charged, there is Constant - Programmable current required.The related parts of the base part number MCP73833 can be found by following the order of the base part number.It contains 10 terminations, so that is how many there are.For the battery pack, it is set to 4.2V.The device is equipped with a total of 10 pins.There are various programmable features, such as Current.With maximum charging current, its rating is 1.1A.The operation?are 10 pins.This application has a total of 1 channels that can be used.Applied input voltage of 6V does not damage the device.Ideally, when the output voltage of the device is set to 4.5V, you will be able to achieve the highest degree of efficiency.During operation, 1.2A represents the output current.This device belongs to the subcategory of Power Management Circuits.The device can operate at as low a supply voltage as possible, such as 3.75V.In terms of the mounting, it is mounted in the way indicated by Surface Mount as far as the mounting is concerned.It was determined during the design process that Vsup (maximum supply voltage) should be set to 3mA.A power supply setting of 0 has been assigned to the part.
MCP73833T-CNI/MF Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73833T-CNI/MF Applications
There are a lot of Microchip Technology MCP73833T-CNI/MF Battery Chargers ICs applications.
- Automotive electronics
- Locomotive
- Boat
- USB power delivery (USB-C) devices
- High end, feature-rich consumer
- Military equipment
- Tablets
- Ruggedized notebooks/tablet computers
- Electric tour bus
- Laptops
