MIC2104YML-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Supplier Device Package | 16-MLF® (3x3) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Series | Hyper Speed Control® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2104 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Max Supply Voltage | 75V |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Topology | Buck |
| Frequency - Switching | 200kHz~600kHz |
| Synchronous Rectifier | Yes |
| Max Duty Cycle | 85 % |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2104YML-TR Overview
It comes in the 16-VFQFN Exposed Pad package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 1. Cut Tape (CT) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. A 4.5V~75V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 200kHz~600kHz. The Surface Mount value makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Power Good. Search for "MIC2104" to find other relevant dc to dc converter ics. In total, switching converter has 16 pins. If you are starting a new project, you should note the dc dc regulator's typical output current is 15A. The duty cycle of the voltage regulator dc to dc can be set to 85 % on power-up or power-down to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. At -40°C and above, dc regulator should be kept. The temperature should not exceed 125°C degrees Celsius. A dc to dc voltage regulator in the Hyper Speed Control? series, it belongs to this family. Supplier dc dc controller package for this part is 16-MLF? (3x3). Switching with 1 phases is the property of this controller. Voltage maximum is rated 75V.
MIC2104YML-TR Features
Transistor Driver Outputs
Switching Frequency: 200kHz~600kHz
Current Limit, Enable, Frequency Control, Power Good
Max Duty Cycle: 85 %
MIC2104YML-TR Applications
There are a lot of Microchip Technology MIC2104YML-TR DC to DC converter applications.
- PSRR circuits
- Medical equipment
- Sink circuits
- Television equipment
- Printing equipment
- Thermal power
- Geothermal power
- Milling machines
- Product burn-in
- Computed tomography (CT)
