MIC2130-1YTSE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Supplier Device Package | 16-eTSSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2130 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Max Supply Voltage | 40V |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Current Limit, Enable, Power Good, Soft Start |
| Topology | Buck |
| Frequency - Switching | 150kHz |
| Synchronous Rectifier | Yes |
| Max Frequency | 170kHz |
| Max Duty Cycle | 92 % |
| Duty Cycle (Max) | 92% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2130-1YTSE-TR Overview
As a result of 16-TSSOP (0.173, 4.40mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 8V~40V. Worked in a -40°C~125°C TJ dc switcher before. With this switching controller, you can switch at 150kHz. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Enable, Power Good, Soft Start provides dcdc regulator efficient switching control. You can find other relevant dc to dc converter ics by searching "MIC2130". Switching converter has a total of 16 pins. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 92 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is a maximum frequency of 170kHz for this dc regulators. DC regulator should be kept at a temperature of -40°C or higher. DC regulator should run at a temperature 125°C higher than 125°C. A supplier dc dc controller package of 16-eTSSOP would be used for this part. This controller switches with 1 phases. In terms of maximum supply voltage, switching voltage regulators is rated 40V.
MIC2130-1YTSE-TR Features
Transistor Driver Outputs
Switching Frequency: 150kHz
Current Limit, Enable, Power Good, Soft Start
Max Duty Cycle: 92 %
MIC2130-1YTSE-TR Applications
There are a lot of Microchip Technology MIC2130-1YTSE-TR DC to DC converter applications.
- Handheld GPS
- Balance equipment
- Correction machines
- Surface processing equipment
- Smoke exhaust equipment
- Window air conditioners
- Geothermal power
- Access control systems
- Gear/thread machining machines
- Energy management systems
