MIC2563A-0BSM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Number of Outputs | 4 |
| Qualification Status | COMMERCIAL |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | Logic |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 200mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | PCMCIA Switch |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 1.8 Ω |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| RoHS Status | Non-RoHS Compliant |
MIC2563A-0BSM Overview
Tube is how it's packaged.It is included with the 28-SSOP (0.209, 5.30mm Width) package as well.Mounting type Surface Mount is selected for the LED driving board.PCMCIA Switch is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.It is possible to use 4 outputs in the lighting driver.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts.It contains 28 terminations.It has 2 functions.The maximum output of the LED driving board is 200mAV.Using a voltage of 3.3V allows for high efficiency.The LED driving board is equipped with a total of 28 pins.The maximum supply voltage is set to 6V.For normal operation, the supply voltage (Vsup) must be kept above 3V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.
MIC2563A-0BSM Features
Supplied from 3.3V
1 channels
MIC2563A-0BSM Applications
There are a lot of Rochester Electronics, LLC MIC2563A-0BSM Power Switches ICs applications.
- Notebook PC
- Solid State Drivers
- USB Ports/Hubs
- Hot-Swap Systems
- USB Power Distribution
- Wireless Headsets
- Hot Swap
- Solid-State Drives
- Storage (HDDs, SSDs)
- Wireless Modem Data Cards
