MIC38HC45-1YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC38HC45 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 6mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~20V |
| Max Supply Current | 6mA |
| Control Features | Frequency Control |
| Input Voltage (Min) | 7.6V |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 15 ns |
| Max Duty Cycle | 50 % |
| Isolation | Isolated |
| Switching Frequency | 500kHz |
| Clock Sync | No |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC38HC45-1YM Overview
Capsuled in the 14-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Tube enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's7.6V~20V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. The Surface Mount makes it ideal for general dc dc regulator. Switching control is made easier with the dcdc regulator's Frequency Control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. 14 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. Other relevant dc to dc converter ics will be returned if you search "MIC38HC45". There are a total of 14 pins on switching converter. The minimum input voltage of the dc dc voltage regulator should be 7.6V. According to the test statistics, DC regulator outputs 5.1V voltage. A maximum voltage of 20V is accepted by the dc to dc regulator as an input voltage. The dc dc regulator's usual output current is 1A, which should be noted down when you start a project. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThe supply voltage must be 15V. There is 6mA supply current for it. The component might suffer damage if the current exceeds 6mA. At 500kHz, this controller performs best.
MIC38HC45-1YM Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Switching Frequency: 500kHz
MIC38HC45-1YM Applications
There are a lot of Microchip Technology MIC38HC45-1YM DC to DC converter applications.
- Radio equipment
- Digital precision reference circuits
- Pipe bending machines
- Textile machinery
- Energy management systems
- Automatic testing equipment
- Remotely powered electric motors
- Injection molding machinery
- Wind power
- Production lines
