MM74HC174M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 31MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 24 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MM74HC174M Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). You can find it in the Tubepackage. There is a Non-Invertedoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. The supply voltage is set to 2V~6V. In the operating environment, the temperature is -40°C~85°C TA. The type of this D latch is D-Type. FPGAs belonging to the 74HCseries contain this type of chip. Its output frequency should not exceed 31MHz. In total, it contains 1 elements. As a result, it consumes 8μA quiescent current. A total of 16 terminations have been made. The D flip flop is powered by a voltage of 5V . This JK flip flop has a 5pFfarad input capacitance. An electronic device belonging to the family HC/UHcan be found here. The maximal supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation.
MM74HC174M Features
Tube package
74HC series
MM74HC174M Applications
There are a lot of Rochester Electronics, LLC MM74HC174M Flip Flops applications.
- Memory
- Common Clocks
- Count Modes
- 2 – Bit synchronous counter
- Buffered Clock
- Divide a clock signal by 2 or 4
- Individual Asynchronous Resets
- Latch-up performance
- Circuit Design
- Reduced system switching noise
