MM74HC174N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 31MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 50 MHz |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
MM74HC174N Overview
The item is packaged in 16-DIP (0.300, 7.62mm)cases. A package named Tubeincludes it. As configured, the output uses Non-Inverted. Positive Edgeis the trigger it is configured with. Through Holeis positioned in the way of this electronic part. The supply voltage is set to 2V~6V. A temperature of -40°C~85°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 74HCseries of FPGAs. A frequency of 31MHzshould be the maximum output frequency. In total, it contains 1 elements. As a result, it consumes 8μA of quiescent current without being affected by external factors. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Power is supplied from a voltage of 4.5V volts. This T flip flop has a capacitance of 5pF farads at the input. This D flip flop belongs to the family of HC/UH. The maximal supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be above 2V.
MM74HC174N Features
Tube package
74HC series
MM74HC174N Applications
There are a lot of Rochester Electronics, LLC MM74HC174N Flip Flops applications.
- Divide a clock signal by 2 or 4
- ATE
- Functionally equivalent to the MC10/100EL29
- Shift Registers
- Clock pulse
- Latch-up performance
- Latch
- Balanced Propagation Delays
- Asynchronous counter
- Frequency division
