MM74HC273N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| JESD-30 Code | R-PDIP-T20 |
| Function | Master Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 78MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 23ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| fmax-Min | 24 MHz |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MM74HC273N Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. It is included in the package Tube. As configured, the output uses Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Through Hole. A voltage of 2V~6Vis required for its operation. It is operating at -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74HCseries of FPGAs. It should not exceed 78MHzin terms of its output frequency. A total of 1 elements are present. T flip flop consumes 8μA quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered by a voltage of 4.5V . Its input capacitance is 7pF farads. HC/UHis the family of this D flip flop. It reaches the maximum supply voltage (Vsup) at 6V. For normal operation, the supply voltage (Vsup) should be kept above 2V.
MM74HC273N Features
Tube package
74HC series
MM74HC273N Applications
There are a lot of Rochester Electronics, LLC MM74HC273N Flip Flops applications.
- ATE
- Counters
- Bounce elimination switch
- Common Clocks
- Event Detectors
- Buffered Clock
- Parallel data storage
- Power down protection
- 2 – Bit synchronous counter
- Load Control
