MM74HC374N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NOT SPECIFIED |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 40ns @ 6V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MM74HC374N Overview
20-DIP (0.300, 7.62mm)is the packaging method. As part of the package Tube, it is embedded. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. It is mounted in the way of Through Hole. A voltage of 2V~6Vis used as the supply voltage. -40°C~85°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. A frequency of 35MHzshould be the maximum output frequency. D latch consists of 1 elements. During its operation, it consumes 8μA quiescent energy. A total of 20terminations have been recorded. The D flip flop is powered by a voltage of 4.5V . A JK flip flop with a 5pFfarad input capacitance is used here. It is a member of the HC/UHfamily of D flip flop. As soon as 6Vis reached, Vsup reaches its maximum value. Normally, the supply voltage (Vsup) should be above 2V. A D flip flop with 2embedded ports is available.
MM74HC374N Features
Tube package
74HC series
MM74HC374N Applications
There are a lot of Rochester Electronics, LLC MM74HC374N Flip Flops applications.
- Data transfer
- Latch-up performance
- Matched Rise and Fall
- Instrumentation
- Safety Clamp
- Load Control
- Single Down Count-Control Line
- Supports Live Insertion
- Functionally equivalent to the MC10/100EL29
- QML qualified product
