MM74HCT374N
| Parameters | |
|---|---|
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.2mA 7.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 46ns @ 5V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 57 ns |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 30MHz |
MM74HCT374N Overview
20-DIP (0.300, 7.62mm)is the packaging method. The package Tubecontains it. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. In the operating environment, the temperature is -40°C~85°C TA. This D latch has the type D-Type. The 74HCTseries comprises this type of FPGA. A frequency of 30MHzshould be the maximum output frequency. There are 1 elements in it. During its operation, it consumes 8μA quiescent energy. A total of 20terminations have been recorded. The power source is powered by 5V. The input capacitance of this JK flip flopis 10pF farads. In this case, the D flip flop belongs to the HCTfamily. Vsup reaches 5.5V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. This D flip flop is equipped with 0 ports.
MM74HCT374N Features
Tube package
74HCT series
MM74HCT374N Applications
There are a lot of Rochester Electronics, LLC MM74HCT374N Flip Flops applications.
- 2 – Bit synchronous counter
- Registers
- Differential Individual
- Count Modes
- ESCC
- Storage Registers
- Data Synchronizers
- Balanced 24 mA output drivers
- Load Control
- Data storage
