MSC7118VF1200
| Parameters | |
|---|---|
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Height Seated (Max) | 1.6mm |
| Length | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | MAPBGA |
| Number of Pins | 400 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 400 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead/Silver (Sn/Pb/Ag) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 300MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 400 |
| Supply Voltage-Max (Vsup) | 1.26V |
| Power Supplies | 1.22.53.3V |
| Supply Voltage-Min (Vsup) | 1.14V |
| Interface | I2C, UART |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Bit Size | 16 |
| Frequency (Max) | 300MHz |
| Data Bus Width | 16b |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Format | FIXED POINT |
| RAM (words) | 262144 |
MSC7118VF1200 Overview
In the MAPBGA package, it is a type of electronic component.There are 400 terminations for its uses.It works with a voltage of 1.2V as a supply voltage.Pins are located on the 400 component.This configuration contains 400 pins.A specific design is present for the device in order for it to operate at the frequency of 300MHz.Mounting is accomplished using Surface Mount.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.Electricity is provided by 1.22.53.3V.DIGITAL SIGNAL PROCESSOR, OTHER is used as the uPs/uCs/peripheral IC type.It is recommended to operate at a lower temperature than 105°C.It should operate at a temperature greater than -40°C.The maximum value of its frequency should be kept below 300MHz.
MSC7118VF1200 Features
Supplied in the MAPBGA package
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
MSC7118VF1200 Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MSC7118VF1200 DSP applications.
- Sonar
- Signal processing for telecommunications
- Radar
- Smart phones
- Streaming videos
- Real-time effects
- Digital image processing
- Infinite impulse response filters
- Vibration signal processing
- Digital camera
