N74F109N,602
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F109 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 125MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 17mA |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| fmax-Min | 90 MHz |
| Max Frequency@Nom-Sup | 90000000Hz |
| RoHS Status | ROHS3 Compliant |
N74F109N,602 Overview
The flip flop is packaged in 16-DIP (0.300, 7.62mm). It is included in the package Tube. This output is configured with Differential. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. In this case, the operating temperature is 0°C~70°C TA. A flip flop of this type is classified as a JK Type. This type of FPGA is a part of the 74F series. There should be no greater frequency than 125MHzon its output. The list contains 2 elements. Despite external influences, it consumes 17mAof quiescent current. A total of 16terminations have been recorded. D latch belongs to the 74F109 family. Power is provided by a 5V supply. This D flip flop belongs to the family of F/FAST. This RS flip flops is a part number FF/Latches. As soon as 5.5Vis reached, Vsup reaches its maximum value. Normally, the supply voltage (Vsup) should be above 4.5V. The D latch runs on a voltage of 5V volts.
N74F109N,602 Features
Tube package
74F series
5V power supplies
N74F109N,602 Applications
There are a lot of NXP USA Inc. N74F109N,602 Flip Flops applications.
- Power down protection
- EMI reduction circuitry
- Parallel data storage
- Single Up Count-Control Line
- Load Control
- Latch-up performance
- Counters
- Convert a momentary switch to a toggle switch
- Single Down Count-Control Line
- Latch
