N74F534N,602
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F534 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 165MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 86mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 24mA |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 7.5 ns |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
N74F534N,602 Overview
It is embeded in 20-DIP (0.300, 7.62mm) case. Package Tubeembeds it. There is a Tri-State, Invertedoutput configured with it. This trigger is configured to use Positive Edge. It is mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In this case, the operating temperature is 0°C~70°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74F series. This D flip flop should not have a frequency greater than 165MHz. A total of 1elements are contained within it. As a result, it consumes 86mA of quiescent current without being affected by external factors. There are 20 terminations,If you search by 74F534, you will find similar parts. The power supply voltage is 5V. It is a member of the F/FASTfamily of D flip flop. The RS flip flops belongs to FF/Latches base part number. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 4.5V. The system runs on a power supply of 5V watts. A total of 2ports are embedded in the D flip flop.
N74F534N,602 Features
Tube package
74F series
5V power supplies
N74F534N,602 Applications
There are a lot of NXP USA Inc. N74F534N,602 Flip Flops applications.
- Modulo – n – counter
- Supports Live Insertion
- Control circuits
- Differential Individual
- Data Synchronizers
- Storage Registers
- Frequency Divider circuits
- Individual Asynchronous Resets
- Single Down Count-Control Line
- Shift registers
