N74F574D,602
| Parameters | |
|---|---|
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | BROADSIDE VERSION OF 374; POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F574 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 180MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 65mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 24mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 70mA |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
N74F574D,602 Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. It is contained within the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. Temperature is set to 0°C~70°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74F series. There should be no greater frequency than 180MHzon its output. The element count is 1 . There is 65mA quiescent consumption. It has been determined that there have been 20 terminations. The 74F574 family contains it. A voltage of 5V is used as the power supply for this D latch. It belongs to the family of electronic devices known as F/FAST. It is part of the FF/Latchesbase part number family. As soon as 5.5Vis reached, Vsup reaches its maximum value. Normally, the supply voltage (Vsup) should be above 4.5V. In order for the device to operate, it requires 5V power supplies. The flip flop has 2ports embedded within it. BROADSIDE VERSION OF 374; POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTIONis also one of its characteristics.
N74F574D,602 Features
Tube package
74F series
5V power supplies
N74F574D,602 Applications
There are a lot of NXP USA Inc. N74F574D,602 Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Count Modes
- Power down protection
- ESD protection
- Safety Clamp
- Bounce elimination switch
- Memory
- Frequency Dividers
- Latch-up performance
- QML qualified product
