NCP1034DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN VOLTAGE MODE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Frequency | 500kHz |
| Base Part Number | NCP1034 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10V~18V |
| Max Supply Current | 3mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 25kHz~500kHz |
| Halogen Free | Halogen Free |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 100V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 80 % |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1034DR2G Overview
It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 10V~18V voltage are supplied and operated. Worked in an dc switcher with a -40°C~125°C TJ rating. It can switch at 25kHz~500kHz. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of terminations with 16 of dc switching. The control methods that these dc dc converter ics use include HYSTERETIC CURRENT MODE. DC switcher's input voltageis 12V volts. A search for "NCP1034" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. voltage regulator dc to dcs with a 80 % duty cycle are designed to be reliable when powered on and powered off. The Surface Mount makes DC switcher suitable for most applications and prototypes. A frequency of 500kHz is set for the switching controller. Hence, ALSO OPERATES IN VOLTAGE MODE is used to better suit the DC to DC voltage regulator's situation. You can set the input voltage to 100V for nominal working status. Having a current greater than 3mA may result in improper operation and possibly damage to the component.
NCP1034DR2G Features
Transistor Driver Outputs
Switching Frequency: 25kHz~500kHz
Current Limit, Enable, Frequency Control, Soft Start
HYSTERETIC CURRENT MODE
Max Duty Cycle: 80 %
Frequency: 500kHz
ALSO OPERATES IN VOLTAGE MODE
NCP1034DR2G Applications
There are a lot of ON Semiconductor NCP1034DR2G DC to DC converter applications.
- Mobile phones
- Photovoltaic power
- Correction machines
- Various precision measuring detectors
- Handheld GPS
- Experimental setup
- Remotely powered electric motors
- Computer rooms
- Lathes
- Digital video recorders
