NCP1070STAT3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 3 |
| Weight | 188.014037mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 14W |
| Max Power Dissipation | 14W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 8.2V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 700μA |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Output Power | 14W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 265V |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1070STAT3G Overview
In the package TO-261-4, TO-261AA , the ac to dc converter is embedded.In Tape & Reel (TR) AC/DC power converter, it is available.As you can see, this AC/DC converter is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~125°C TJ °C so that it can deliver its performance.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .The switching frequency reaches 65kHz .Supply voltage (Vcc/Vdd) does not need to exceed 6.3V~10V .In total, there are 4 terminations.The ac/dc converter has 3 pins.The ac dc converters are suitable to mount by Surface Mount .The number of outputs to run is 1 .Switching Regulator or Controllers includes the ac to dc conversions.Current output is set to 250mA .You can read the standard for REACH SVHC at: No SVHC .An input voltage of 265V is available for powering the AC to DC converter.The output power of a coverter is assumed to be 14W .An input voltage of less than 85V V is required to operate the AC to DC inverter.At 8.2V supply voltage, the interface IC conducts.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .
NCP1070STAT3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 65kHz
With 3 pins
Output Current at 250mA
Operating Supply Voltage at the range of 8.2V
NCP1070STAT3G Applications
There are a lot of ON Semiconductor NCP1070STAT3G AC DC Converters applications.
- Universal input AC/DC adapters (15W - 45W)
- Adaptors for Portable Media Player
- Automotive Infotainment
- Adaptors for DSCs
- Digital cameras
- PDAs
- Shaver Charger
- White goods
- Standby and Auxiliary Power Supplies
- Automotive Clusters
