NCP1580DR2G
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1580 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Control Features | Phase Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 350kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 6ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 412kHz |
| Max Duty Cycle | 95 % |
| Duty Cycle (Max) | 90% |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1580DR2G Overview
This switching controller fits most application requirements since it is packaged in a 8-SOIC (0.154, 3.90mm Width) package. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 4.5V~13.2V. Worked in an dc switcher with a -40°C~85°C TA rating. It can switch at 350kHz. dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Phase Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. 8 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. In addition to "NCP1580", there are other relevant dc to dc converter ics you can find. 8 pins are present on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 4.5V. Test statistics indicate DC regulator outputs 800mV voltage. You should note down the dc dc regulator's usual output current of 1.5A when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 95 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher's412kHz is the maximum frequency of this dc regulators.
NCP1580DR2G Features
Transistor Driver Outputs
Switching Frequency: 350kHz
Phase Control
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
NCP1580DR2G Applications
There are a lot of ON Semiconductor NCP1580DR2G DC to DC converter applications.
- Computer-related products
- Low output voltage switching power supply circuits
- Wide-range voltage regulation circuits
- Handheld GPS
- Scientific research
- PSRR circuits
- Telecommunications equipment
- Smart grid
- CNC system
- Various CNC machine tools
