NCP1800DM42R2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1800 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Voltage | 4.2V |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 20mA |
| Input Voltage (Min) | 2.5V |
| Supply Current-Max (Isup) | 0.25mA |
| Switcher Configuration | SINGLE |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1A |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1800DM42R2 Overview
There is an Tape & Reel (TR) package that contains it. The package that is included with it comes in the shape of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).In this case, the device is mounted in the way of Surface Mount.It is recommended that the temperature be set to -20°C~85°C TA in order to ensure reliable performance.The functionality of this device is provided by an analog IC called BATTERY CHARGE CONTROLLER.To charge the device, you need Constant - Programmable current.This part number NCP1800 can be used to find its related parts.It is possible to find a total of 8 terminations.The device is equipped with a total of 8 pins.There are several programmable features, such as Current.When charging current is maximum, it is rated at 1A.High efficiency can be achieved with a 4.2V output voltage.There is 20mA output current when the device operates.The device falls under the Power Management Circuits subcategory.In order to mount it, it has to align itself with Surface Mount.Vsup (maximum supply voltage) is set in the command to 0.25mA.There is 6V voltage input on the device.It is recommended to set the supply voltage to 16V in order to maximize the efficiency of the system.It is required that the input voltage be 2.5V volts at the minimum.
NCP1800DM42R2 Features
Power Management Circuits subcategory
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NCP1800DM42R2 Applications
There are a lot of ON Semiconductor NCP1800DM42R2 Battery Chargers ICs applications.
- GPS tracker
- TV sticks
- Automotive electronics
- Electrical Utility industry
- Fast charge
- Fleet management
- Remote sensor
- Electric pallet truck
- Digital camera
- Man lift
