NCP3020BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Frequency | 600kHz |
| Base Part Number | NCP3020 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 7.8mA |
| Voltage - Supply (Vcc/Vdd) | 4.7V~28V |
| Max Supply Current | 10mA |
| Input Voltage (Min) | 4.7V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 84 % |
| Duty Cycle (Max) | 80% |
| Clock Sync | No |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP3020BDR2G Overview
This switching controller fits most application requirements since it is packaged in a 8-SOIC (0.154, 3.90mm Width) package. It is sufficient to generate 1 outputs with this dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 4.7V~28V and has a 4.7V~28V supply voltage. Worked in a -40°C~125°C TJ dc switcher before. The Surface Mount value makes it suitable for general dc dc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . 8 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 12V. You can find other relevant dc to dc converter ics by searching "NCP3020". Switching converter has a total of 8 pins. The type is a particular Switching Regulator or Controllers of switching converter. The minimum input voltage of the dc dc voltage regulator should be 4.7V. Test statistics indicate DC regulator outputs 600mV voltage. It's important to remember that the dc dc regulator's normaloutput current is 7.8mA, so you should note it down when starting a new project. The duty cycle of the voltage regulator dc to dc can be set to 84 % on power-up or power-down to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is 600kHz frequency setting on the switching controller. The component might suffer damage if the current exceeds 10mA.
NCP3020BDR2G Features
Transistor Driver Outputs
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
Frequency: 600kHz
NCP3020BDR2G Applications
There are a lot of ON Semiconductor NCP3020BDR2G DC to DC converter applications.
- Ball screw pair
- Gear/thread machining machines
- Digital video recorders
- Photovoltaic power
- Hydrogen power
- USB circuits
- Imported equipment
- Various CNC machine tools
- Serial communication converter
- Die casting equipment
