NCP3030ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Frequency | 1.2MHz |
| Base Part Number | NCP3030 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.7V~28V |
| Max Supply Current | 12.7mA |
| Input Voltage (Min) | 4.7V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 84 % |
| Duty Cycle (Max) | 84% |
| Clock Sync | No |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP3030ADR2G Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. 1 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. There are Transistor Driver dc switching's output (s) that it can handle. 4.7V~28V is the operating voltage and supply voltage of the dc control. Qualified to work in a -40°C~125°C TJ dc switcher. It is suitable for general dc dc regulator when it is set to Surface Mount. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. A variety of dc switching's functions can be performed on 8 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. Other relevant dc to dc converter ics can be found by searching "NCP3030". In total, switching converter has 8 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.7V. DC regulator outputs 800mV voltage according to the test statistics. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 84 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Switching controllers operate at 1.2MHz frequencies. Components may be damaged if their current is greater than 12.7mA.
NCP3030ADR2G Features
Transistor Driver Outputs
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
Frequency: 1.2MHz
NCP3030ADR2G Applications
There are a lot of ON Semiconductor NCP3030ADR2G DC to DC converter applications.
- Nuclear power plants
- Electrical power transmission
- Surface processing equipment
- Milling machines
- Balance equipment
- Refrigerators of central air conditioners
- Imported equipment
- Automatic testing equipment
- Cutting machine tools
- Various CNC machine tools
