NCP3030BDR2G
| Parameters | |
|---|---|
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 80 % |
| Duty Cycle (Max) | 80% |
| Clock Sync | No |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Frequency | 2.4MHz |
| Base Part Number | NCP3030 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.7V~28V |
| Max Supply Current | 17.4mA |
| Input Voltage (Min) | 4.7V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Halogen Free | Halogen Free |
NCP3030BDR2G Overview
The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. dc motor controller is suitable for 1 output generation. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With this function, you can deal with Transistor Driver dc switching's outputs (s). A 4.7V~28V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~125°C TJ dc switcher before. The Surface Mount value makes it suitable for general dc dc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at DUAL. The 8 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics can be found by searching "NCP3030". The switching converter has a total of 8 pins. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 4.7V. DC regulator outputs 800mV voltage based on test statistics. Voltage regulator dc to dc is designed to operate at 80 % duty cycle during power-ups and power-downs to ensure reliability. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher's2.4MHz is the frequency of the switching controller. Having a current greater than 17.4mA may result in improper operation and possibly damage to the component.
NCP3030BDR2G Features
Transistor Driver Outputs
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 2.4MHz
NCP3030BDR2G Applications
There are a lot of ON Semiconductor NCP3030BDR2G DC to DC converter applications.
- Scientific research
- Motor controller circuits
- Energy management systems
- Shearing machines
- Driver circuits
- Automation technology
- CNC system
- Injection molding machinery
- Smoke exhaust equipment
- Electric heating, lighting
