NCP5005SNT1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 5 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 160mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Frequency | 1.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5005 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Interface | Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 160mW |
| Output Current | 50mA |
| Max Output Voltage | 24V |
| Voltage - Output | 24V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 50mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 5 |
| Multiplexed Display Capability | NO |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP5005SNT1G Overview
It saves board space with the SOT-23-5 Thin, TSOT-23-5 package. LED drivers have a total of 1 outputs that are used in the design of the drivers.As far as mounting is concerned, Surface Mount is adopted.DC DC Regulator emerges with high efficiency and reliability.It is possible for the led driver ic to operate normally at -25°C~85°C TA.It provides considerable benefits for Backlight.A frequency of 1.2MHz is used as the basis for operation.There are 5 terminations that are designed to operate with it.A configuration of this chip is made up of 5 pins.A total of 5 segments are estimated.There is a mounting of it by Surface Mount.It is under the base part number NCP5005 that you can find this LED driver.The supply voltage of 5.5V is an acceptable maximum value.The output voltage of the device is 24V.5 pins are included in it.Additionally, it is categorized into Display Drivers according to its characteristics.Initially, it accepts a voltage of 2.7V.The maximum efficiency can be achieved by operating it at a minimal voltage of 2.7V.It is possible to supply current up to 5.5V.You can supply 50mA current to the load.It is important that the output voltage does not exceed 24V.
NCP5005SNT1G Features
Available in the SOT-23-5 Thin, TSOT-23-5 package
Operating temperature of -25°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
NCP5005SNT1G Applications
There are a lot of ON Semiconductor NCP5005SNT1G LED Driver ICs applications.
- Sports Facility Lighting
- LED backlight driver for LCD displays for portable equipment
- Down lighting
- Linear fluorescent
- Refrigeration lighting
- Panel lighting
- OLED power supply for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Auxiliary lights for on-vehicle cameras
- Other Electronic Devices
