NCP5230MNTWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 3.3V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | NCP5230 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 5mA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Control Features | Enable, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 95 % |
| Isolation | Non-Isolated |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP5230MNTWG Overview
With its 16-VFQFN Exposed Pad package, the switching controller fits the needs of most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 4.5V~13.2V. A 0°C~85°C TA dc switcher is not a problem. Switching can be done at 100kHz~1MHz with this switching controller. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Enable, Power Good which allows efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. switching converters terminal (s) are designed to be at QUAD. A variety of dc switching's functions can be performed on 16 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 5V. Other relevant dc to dc converter ics will be returned if you search "NCP5230". Pins number 16 of switching converter in total. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Test statistics indicate DC regulator outputs 3.3V voltage. It is set to 95 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator has a maximum frequency of 1MHz. DC to DC voltage regulator has the value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 3.3V to better satisfy the requirement. With a current supply of 5mA, it runs.
NCP5230MNTWG Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 3.3V
NCP5230MNTWG Applications
There are a lot of ON Semiconductor NCP5230MNTWG DC to DC converter applications.
- Boring machines
- Textile machinery
- Constant current circuits
- Direct power supply system
- Game consoles
- Automation technology
- Household control circuits
- Electric water heaters
- Access control systems
- Window air conditioners
