NCP5425DBG
| Parameters | |
|---|---|
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 13.2V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4V~16V |
| Control Features | Frequency Control |
| Max Output Voltage | 808mV |
| Topology | Buck |
| Min Input Voltage | 4.6V |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Frequency - Switching | 150kHz~750kHz |
| Max Input Voltage | 13.2V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 792mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 938kHz |
| Max Duty Cycle | 100 % |
| Clock Sync | No |
| Height | 1.05mm |
| Length | 6.6mm |
| Width | 4.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | NCP5425 |
NCP5425DBG Overview
As a result of 20-TSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. For outputs of 2, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. The system can process Transistor Driver dc switching's outputs (s). 4V~16V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where 0°C~125°C TJ is the 0°C~125°C TJrm. Switching can be done at 150kHz~750kHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . Various 20 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. Search for "NCP5425" to find other relevant dc to dc converter ics. Switching converter has a total of 20 pins. In particular, switching converter is a type of Switching Regulator or Controllers. In most cases, the dc dc regulator's output current is 1.5A. This information should be noted when you begin working with the component. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulator's maximum frequency is 938kHz. A circuit should contain 13.2V in order to ensure the voltage regulator dc to dc runs safely and reliably. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 13.2V. Switching controller is necessary to have a supply voltage of 4.6V. The dc switcher will not provide an output current greater than 1.5A. At its maximum output, the switching converter can provide 808mV volts. 792mV voltage output is lower than 792mV.
NCP5425DBG Features
Transistor Driver Outputs
Switching Frequency: 150kHz~750kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
NCP5425DBG Applications
There are a lot of ON Semiconductor NCP5425DBG DC to DC converter applications.
- Television equipment
- Cutting machine tools
- Photovoltaic power
- Sink circuits
- USB circuits
- Hydrogen power
- Die casting equipment
- Machining centers
- Computer-related products
- CMM
