NCV3030ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | NCV3030 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 12.7mA |
| Nominal Supply Current | 12.7mA |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.7V~28V |
| Input Voltage (Min) | 4.7V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1.2MHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.44MHz |
| Max Duty Cycle | 84 % |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV3030ADR2G Overview
As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. For outputs of 1, this dc motor controller is suitable. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The system can process Transistor Driver dc switching's outputs (s). dc controls with 4.7V~28V voltage are supplied and operated. Suitable for work in a -40°C~125°C TJ dc switcher. Using this switching controller, it is possible to switch at 1.2MHz. Surface Mount makes it suitable for general dc dc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . 8 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "NCV3030". There are a total of 8 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. dc dc voltage regulators should have a minimum input voltage of 4.7V. Based on the test statistics, DC regulator outputs voltage 3.3V. In most cases, the dc dc regulator's output current is 3A. This information should be noted when you begin working with the component. Voltage regulator dc to dc is designed to operate at 84 % duty cycle during power-ups and power-downs to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is a maximum frequency of 1.44MHz for this dc regulators. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 40V. Basically, it's a dc to dc voltage regulator from the Automotive, AEC-Q100 series. With a current supply of 12.7mA, it runs. There is 12.7mA nominal current supply for this the controllers dc.
NCV3030ADR2G Features
Transistor Driver Outputs
Switching Frequency: 1.2MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
NCV3030ADR2G Applications
There are a lot of ON Semiconductor NCV3030ADR2G DC to DC converter applications.
- Printing equipment
- Cutting machine tools
- Automatic testing equipment
- Current source circuits
- Medical monitoring systems
- Access control systems
- Linear guide
- Mobile phones
- CNC system
- Sink circuits
