NCV8852DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | NCV8852 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 44V |
| Input Voltage-Nom | 4V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 3.1V~40V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 3.4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 501kHz |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 93% |
| Clock Sync | Yes |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV8852DR2G Overview
With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. 1 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). Voltages 3.1V~40V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~150°C TJ dc switcher. It can switch at 100kHz~500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Enable, Frequency Control provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 8. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 4V. Other relevant dc to dc converter ics can be found by searching "NCV8852". There are only 8 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. 3.4V should be the minimum input voltage for the dc dc voltage regulator. The dc to dc regulator can only accept 36V input voltage. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulators have a maximum frequency of 501kHz. When running the voltage regulator dc to dc in a circuit, users should apply 44V to ensure safety and reliability. Automotive, AEC-Q100 is a series of dc to dc voltage regulator.
NCV8852DR2G Features
Transistor Driver Outputs
Switching Frequency: 100kHz~500kHz
Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
NCV8852DR2G Applications
There are a lot of ON Semiconductor NCV8852DR2G DC to DC converter applications.
- Computer rooms
- Constant current circuits
- Hydraulic presses
- Sink circuits
- Nuclear power plants
- Shearing machines
- Flaw detection equipment
- Adjustable voltage or current linear circuits
- Large fire protection systems
- Lathes
