NL17SZ74USG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 17SZ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Capacitance | 7pF |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Current Rating | 24mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 17SZ74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 100mA |
| Power Dissipation | 250mW |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 14.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 2.2 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.5 ns |
| Trigger Type | Positive Edge |
| Number of Output Lines | 1 |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 787.4μm |
| Length | 2.0828mm |
| Width | 2.3876mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NL17SZ74USG Overview
8-VFSOP (0.091, 2.30mm Width)is the packaging method. The Tape & Reel (TR)package contains it. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Surface Mount. A 1.65V~5.5Vsupply voltage is required for it to operate. It is operating at a temperature of -55°C~125°C TA. A flip flop of this type is classified as a D-Type. It is a type of FPGA belonging to the 17SZ series. Its output frequency should not exceed 200MHz Hz. It has been determined that there have been 8 terminations. The object belongs to the 17SZ74 family. It is powered by a voltage of 1.8V . In this case, the electronic component is mounted in the way of Surface Mount. As you can see from the design, it has pins with 8. This device's clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. There are 1bits in this flip flop. Vsup reaches 5.5V, the maximal supply voltage. To achieve this superior flexibility, 1 circuits are used. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D latch operates on 3.3V volts. The 32mA output current allows it to be designed with the greatest amount of flexibility. There are 1 output lines on it. It consumes 1μA of quiescent current without being affected by external factors.
NL17SZ74USG Features
Tape & Reel (TR) package
17SZ series
8 pins
1 Bits
3.3V power supplies
NL17SZ74USG Applications
There are a lot of ON Semiconductor NL17SZ74USG Flip Flops applications.
- Buffer registers
- Latch-up performance
- Buffered Clock
- Memory
- CMOS Process
- Patented noise
- Balanced Propagation Delays
- Frequency division
- ESD performance
- Computing
