PCM3000E/2K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM3000 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 50mA |
| Number of Bits | 18 |
| Data Interface | Serial |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.5V~5.5V |
| Voltage - Supply, Digital | 4.5V~5.5V |
| Power Consumption | 160mW |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 94 dB |
| Number of ADC Channels | 2 |
| Resolution (Bits) | 18 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 94 / 97 |
| S/N Ratio, ADCs / DACs (db) Typ | 94 / 98 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM3000E/2K Overview
A 28-SSOP (0.209, 5.30mm Width) package is supplied for space savings. Tape & Reel (TR) packaging method is used. As a type of Stereo Audio, this electronic part is able to deliver high-efficient performance in various applications. Surface Mount is the mounting type employed by this device. Operating performance at -25°C~85°C makes it possible to operate normally. It is integrated with 2 / 2 ADCs / DACs. The analog circuit is provided with the supply voltage of 4.5V~5.5V. It is supplied with a voltage of 4.5V~5.5V to power the digital circuit. Signals are prevented from reflecting off the transmission line's terminations by using 28 terminations. The device has 28 pins. There are 28 pins on this board. Find more related parts by using its base part number PCM3000. 5.5V should be the maximum value of the supply voltage. To convert analog signals into digital signals, there are 1 A/D converters. There is subcategory Other Consumer ICs for this electronic part. The minimum value of supply voltage should be maintained at 4.5V. With a power supply of 5V, it runs. The device is able to operate at 5V voltages. Information is stored using 18 bits. The normal electrical current of 50mA that is expected to flow through the circuit at any given time. ADC channels represent the number of analog values that can be read simultaneously.
PCM3000E/2K Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
PCM3000E/2K Applications
There are a lot of Texas Instruments PCM3000E/2K CODECs Interface ICs applications.
- Stagecraft
- Sawmills
- Oil & gas production
- Feature extraction
- Robotics vehicle with the metal detector
- Electronics industry
- Anomaly detection
- Food & beverage
- Linear measurement
- Data distribution
