PI3CH800QEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 1.8V 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI3CH800 |
| Circuit | 1 x 8:8 |
| Supply Voltage-Max (Vsup) | 2.75V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.25V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 300 ps |
| Quiescent Current | 800μA |
| Family | 3CH |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PI3CH800QEX Overview
Providing this information in the 20-SSOP (0.154, 3.90mm Width) enables digital switch board space to be saved.It is packaged in the way of Tape & Reel (TR).Mounting is performed using Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.In the case of -40°C~85°C TA, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 1.8V 2.5V 3.3V.provides digital controlled switch's digital controlled switch'sAs parts of its basic configuration, 20 terminations are desgined.Its logic switch base part number is PI3CH800 which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 2.5V volts.Conductors terminate at GULL WING in this design.Its supply type is Single, which is used as the source of power.This multiplexer ic is configured with 20 pins.The mounting point is Surface Mount.The logic switch is a member of the family of 3CH.As a result, signal multiplexer provides 1 bits.Keeping Vsup at 2.25V will prevent some unwanted failures.Avoid unnecessary failures by keeping Vsup at 2.75V.A power supply is provided for mux switch's normal operation of 2.5/3.3V.Bus Driver/Transceivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 800μA current of multiplexer ic.The resistance of the signal switching is 2.As far as the resistance is concerned, it operates with 7Ohm.The characteristics of ALSO OPERATES AT 3.3V SUPPLY are also improved.
PI3CH800QEX Features
Supplied in the 20-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY
PI3CH800QEX Applications
There are a lot of Diodes Incorporated PI3CH800QEX Signal Switches / Multiplexers / Decoders applications.
- Control unit of Central Processing unit (CPU)
- Memory system of computers
- Data transfer
- To select different devices in microprocessor output
- Data communication
- Enabling different functions units in microprocessor instruction decoding
- Steel plants
- Electronics industry
- Analog, digital or video signal switching
- Medium scale TV wall
