S-8520F15MC-BNAT2U
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.95mm |
| JESD-30 Code | R-PDSO-G5 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 2.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.5V~16V |
| Control Features | Enable |
| Input Voltage (Min) | 2.5V |
| Topology | Buck |
| Output Current-Max | 0.05A |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Length | 2.9mm |
| RoHS Status | RoHS Compliant |
S-8520F15MC-BNAT2U Overview
This switching controller fits most application requirements since it is packaged in a SC-74A, SOT-753 package. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. 2.5V~16V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. With this switching controller, you can switch at 300kHz. The Surface Mount makes it ideal for general dc dc regulator. Enable provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at DUAL . 5 terminations with various dc switching's functions. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 2.5V nominal DC switcher's voltage input. dc dc voltage regulators should have a minimum input voltage of 2.5V. A 1.5V voltage of DC regulator was detected in the test statistics. Current is output to the greatest value of 0.05A.
S-8520F15MC-BNAT2U Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
S-8520F15MC-BNAT2U Applications
There are a lot of ABLIC U.S.A. Inc. S-8520F15MC-BNAT2U DC to DC converter applications.
- Special machining machine tools
- Scientific research
- Printing
- Smoke exhaust equipment
- SMT equipment
- Scientific testing
- Digital display device
- Industrial robots
- Combined machine tools
- Servo drive system
