SC2608ASTRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | SC2608 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~14V |
| Max Supply Current | 6μA |
| Control Features | Enable, Phase Control, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 90 % |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Height | 1.62mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC2608ASTRT Overview
With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With this function, you can deal with Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 4.5V~14V. Work well in dc switchers with a -40°C~125°C TJ. The switching controller can be switched at 250kHz. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Enable, Phase Control, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 8 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. You can find other relevant dc to dc converter ics by searching "SC2608". 8 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. The maximum duty cycle of this voltage regulator dc to dc is set to 90 % to ensure reliability during power-up and power-down. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Components may be damaged if their current is greater than 6μA.
SC2608ASTRT Features
Transistor Driver Outputs
Switching Frequency: 250kHz
Enable, Phase Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
SC2608ASTRT Applications
There are a lot of Semtech Corporation SC2608ASTRT DC to DC converter applications.
- Sensitive electronic devices
- Product testing
- Imported equipment
- Geothermal power
- Serial communication converter
- Large fire protection systems
- Production lines
- Driver circuits
- Product burn-in
- Correction machines
