SG1525AJ-883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | IN PRODUCTION (Last Updated: 1 month ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 0.5A |
| Frequency - Switching | 100Hz~350kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Max Frequency | 350kHz |
| Screening Level | MIL-STD-883 Class B |
| Max Duty Cycle | 49 % |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SG1525AJ-883B Overview
With a 16-CDIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. For outputs of 2, this dc motor controller is suitable. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. Voltages 8V~35V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -55°C~125°C TA dc switcher. Using this switching controller, it is possible to switch at 100Hz~350kHz. Through Hole makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. The 16 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 20V nominal DC switcher's voltage input. Pins number 16 of switching converter in total. The type is a particular Switching Regulator or Controllers of switching converter. Input voltage of dc dc voltage regulator should be 8V. The dc to dc regulator is limited to 35V input voltage. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 49 %. DC switcher's Through Hole makes it qualified for most application and prototype designs. DC switcher'sThe max frequency of the pmic can reach 350kHz. 0.5A is the greatest value switching converter outputs as current.
SG1525AJ-883B Features
Transistor Driver Outputs
Switching Frequency: 100Hz~350kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
SG1525AJ-883B Applications
There are a lot of Microchip Technology SG1525AJ-883B DC to DC converter applications.
- Linear guide
- Plate bending machines
- Precision electronic equipment
- Planers
- Shearing machines
- Handheld GPS
- Digital precision reference circuits
- Electrical distribution systems
- Injection molding machinery
- Computed tomography (CT)
