SG2525AP013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SG2525 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 14mA |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Max Supply Current | 20mA |
| Quiescent Current | 14mA |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100Hz~400kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Max Duty Cycle | 49 % |
| Isolation | Non-Isolated |
| Output Phases | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SG2525AP013TR Overview
Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 2 output generation. Cut Tape (CT) solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 8V~35V volts and has 8V~35V supply voltage. Worked in a -25°C~85°C TA dc switcher before. It can switch at 100Hz~400kHz. The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . An array of 16 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 20V is input. A search for "SG2525" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 16. Input voltage of dc dc voltage regulator must be 8V. The test statistics indicate that DC regulator outputs a voltage of 5.1V. At most, the dc to dc regulator accepts 35V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 500mA. The maximum duty cycle of this voltage regulator dc to dc is set to 49 % to ensure reliability during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. A frequency of 500kHz is used by the switching controller. The dc switching utilizes 14mA when it is in a dormant state. There is a 14mA volt supply current. The component might suffer damage if the current exceeds 20mA.
SG2525AP013TR Features
Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 500kHz
SG2525AP013TR Applications
There are a lot of STMicroelectronics SG2525AP013TR DC to DC converter applications.
- Balance equipment
- Automation technology
- Sensitive electronic devices
- Linear guide
- Motor controller circuits
- Digital display device
- Large fire protection systems
- Cutting machine tools
- Digital precision reference circuits
- USB circuits
