SG3525ADWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SG3525A |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100Hz~400kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Max Frequency | 400kHz |
| Max Duty Cycle | 49 % |
| Output Phases | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SG3525ADWR2 Overview
In the 16-SOIC (0.295, 7.50mm Width) package, the switching controller meets most application requirements. 2 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 8V~35V. Suitable for work in a 0°C~70°C TA dc switcher. Switching can be done at 100Hz~400kHz with this switching controller. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . 16 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 20V. Searching "SG3525A" will return other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator should be 8V. A maximum voltage of 35V is accepted by the dc to dc regulator as an input voltage. You should note that the dc dc regulator's usual output current is 400mA. The maximum duty cycle of this voltage regulator dc to dc is set to 49 % to ensure reliability during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator's maximum frequency is 400kHz.
SG3525ADWR2 Features
Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
SG3525ADWR2 Applications
There are a lot of ON Semiconductor SG3525ADWR2 DC to DC converter applications.
- Automation technology
- Lathes
- Laboratories
- Electric heating, lighting
- Handheld GPS
- Drilling machines
- Industrial robots
- Shearing machines
- Domestic water pumps
- Plate bending machines
