SG3526DW
| Parameters | |
|---|---|
| Rise Time | 300ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 49 % |
| Clock Sync | No |
| Output Phases | 1 |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SG*526 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 18mA |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 18mA |
| Control Features | Dead Time Control, Enable, Frequency Control, Reset, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1Hz~350kHz |
| Control Technique | PULSE WIDTH MODULATION |
SG3526DW Overview
It comes in the 18-SOIC (0.295, 7.50mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 2. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 8V~35V. Qualified to work in an dc switcher with 0°C~70°C TA. There is a switch at 1Hz~350kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Dead Time Control, Enable, Frequency Control, Reset, Soft Start for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. Thare switching converters has a terminal (s) at DUAL . 18 terminations with a variety of function. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "SG*526". 18 pins are present on switching converter. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 8V. As determined by the test statistics, the output voltage of DC regulator is 5V. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. voltage regulator dc to dcs with a 49 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controller operates at 500kHz Hz. DC switching uses 18mA when it is dormant. The supply current of the voltage controller is 18mA.
SG3526DW Features
Transistor Driver Outputs
Switching Frequency: 1Hz~350kHz
Dead Time Control, Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 500kHz
SG3526DW Applications
There are a lot of Microchip Technology SG3526DW DC to DC converter applications.
- Analog precision reference circuits
- Medical equipment
- Scientific testing
- Shearing machines
- Overvoltage protection circuits in TV sets
- Milling machines
- Thermal power
- Program control systems
- SMT equipment
- Automatic testing equipment
