SIP5630CG-T1-E3
| Parameters | |
|---|---|
| Package / Case | QSOP |
| Surface Mount | YES |
| Supplier Device Package | 36-QSOP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | SCSI |
| Resistance | 108Ohm |
| Terminal Finish | MATTE TIN |
| Subcategory | Bus Terminators |
| Voltage - Supply | 2.7V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP56* |
| Pin Count | 36 |
| JESD-30 Code | R-PDSO-G36 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 3/5V |
| Operating Supply Current | 30mA |
| Differential Output | YES |
| Number of Signal Lines | 9 |
| Height | 2.34mm |
| Length | 15.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
SIP5630CG-T1-E3 Overview
The 9 termination method ends a transmission line with a device that matches the line's characteristic impedance. Because of the low cost of its packages, the QSOP is well known in the electronic industry. Tape & Reel (TR)'s packaging follows his material specifications. Mounting it on a PCB is done with Surface Mount. There should not be an increase in Operating Temperature over 0°C~70°C. A SCSI-qualified material, it can be used for standard applications. Ensure normal operation by providing a 2.7V~5.25V Supply Voltage. You can use Base Part Number SIP56* to locate related parts. For specific uses, 36 pins are included. There are 9?signal lines, which mean those lines for public or private signal or communication service and devoted exclusively to the transmission of signals or intelligence. Keeping the supply voltage at 3.3V is essential for high efficiency. As part of Subcategory Bus Terminators, it is included. Powered by 3/5V Power Supplies, the system can operate. This device has a resistance of 108Ohm (Ω). Several of the supplier's devices are packaged in 36-QSOP. Because it is able to work with a variety of supply voltages, the device is versatile. To fully perform its functions, 5.25V needs supply current.
SIP5630CG-T1-E3 Features
9 terminations
Tape & Reel (TR) package
SIP56* family
36 pin count
9 signal lines
3/5V power supplies
SIP5630CG-T1-E3 Applications
There are a lot of Vishay Siliconix SIP5630CG-T1-E3 Signal Terminators applications.
- Programmable logic controller
- Programmable logic controller and remote input modules
- Notebooks
- tape drives
- SCSI cable
- Remote input module
- Storage area networks (SAN)
- plotters
- USB hubs
- Telecommunication Equipment
