SM320C50HFGM50
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 132 |
| Pbfree Code | no |
| Number of Terminations | 132 |
| ECCN Code | 3A001.A.2.C |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 132 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| RAM Size | 20.1kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 225mA |
| Bit Size | 16 |
| Frequency (Max) | 50MHz |
| Data Bus Width | 16b |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Screening Level | MIL-PRF-38535 |
| Format | FIXED POINT |
| RAM (words) | 1056 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Height Seated (Max) | 2.92mm |
| Length | 24.19mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SM320C50HFGM50 Overview
The 132 terminations are used for its uses.5V is the supply voltage.There are pins on the 132 component.In its configuration, there are 132 pins.50MHz is a frequency at which the device operates according to a specific design.Using Surface Mount as a mounting method, it is mounted.The specific characteristics of this device can be categoriDigital Signal Processorsed within the Digital Signal Processors subcategory.It is possible to supply as low a voltage as 4.75V to this device.This device can be powered by 5.25V voltages.A supply voltage of 5V is required for its operation.It is supplied with 5V electric power.DIGITAL SIGNAL PROCESSOR, OTHER is used as uPs/uCs/peripheral ICs.There should be a difference between 125°C and the operating temperature.Temperatures should exceed -55°C during operation.A frequency of less than 50MHz should be used.
SM320C50HFGM50 Features
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
SM320C50HFGM50 Applications
There are a lot of Texas Instruments SM320C50HFGM50 DSP applications.
- Tomography technology
- House construction
- Geophysical processing
- Electronic information engineering
- Audio signal
- Encoding/broadcast
- Medical imaging
- Voice recognition
- Infinite impulse response filters
- Audio compression
