SMJ320C15-25JDM
| Parameters | |
|---|---|
| Mount | Through Hole |
| Number of Pins | 40 |
| Pbfree Code | no |
| Number of Terminations | 40 |
| ECCN Code | 3A001.A.2.C |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | ROM PROTECT |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 25.6MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 8kB |
| RAM Size | 512B |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 65mA |
| Bit Size | 16 |
| Address Bus Width | 12 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | MIL-PRF-38535 |
| External Data Bus Width | 16 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 256 |
| ROM Programmability | MROM |
| Number of External Interrupts | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Height Seated (Max) | 4.45mm |
| Width | 15.24mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SMJ320C15-25JDM Overview
In order to use it, it has 40 terminations.The voltage supplied by 5V is used to operate it.Pins are present on the 40 component.This configuration contains 40 pins.In order for the device to operate at the frequency of 25.6MHz, it has been designed specifically.It adopts Through Hole as its mounting way.The device can be classified as part of the Digital Signal Processors subcategory based on its specific characteristics.This device operates at a voltage as low as 4.5V.There is a maximum voltage supply of 5.5V to this device.It operates with the supply voltage of 5V.Its memory can be used to store 8kB data.It is supplied with 5V electric power.Using this electronic part, ROM PROTECT can also have additional features.This device utiliDIGITAL SIGNAL PROCESSOR, OTHERes the DIGITAL SIGNAL PROCESSOR, OTHER type of uPs, uCs, and peripheral ICs.It is recommended to operate at a lower temperature than 125°C.A temperature exceeding -55°C is recommended for operation.There are 1 interrupts caused by an external source.
SMJ320C15-25JDM Features
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
1 external interrupts
SMJ320C15-25JDM Applications
There are a lot of Texas Instruments SMJ320C15-25JDM DSP applications.
- Vibration signal processing
- Digital image processing, data compression
- Compression of videos
- Sonar
- Audio signal
- Radar
- Digital image processing
- Computers and laptop
- Biometrics
- Speech signal processing
